Axminster T-2000CK Istruzioni per gli Interventi Scaricare il pdf (Pagina 11)

Assembly

7. Locate the extraction funnel (12). Loosen the clamping

rig bolt/nut to the base of the funnel, lower the wide end

of the funnel on top of the drum (7) and line up the rims.

Position the clamping ring over the rims and tighten the

bolt/nut to lock both units (7-12) together, see 16-17-18.

Fig 16-17-18

8. Locate the bin cover (10), 1/4 “ Hex bolts (g), 1/4" nuts

(a) and the supplied 10-12mm spanner (26). Place the

bin cover (10) face up, on top of the funnel assembly

(12). Line up the pre-drilled holes, place a Hex bolt (g)

down through one of the holes and lightly secure with

a 1/4"nut (a), see ﬁ g 19-20-21. Repeat for the remaining

holes then fully tighten, see ﬁ g 22.

Clamping ring

Rim

Fig 19

Fig 20-21-22

Continues Over....

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Nessun commento

Axminster T-2000CK Istruzioni per gli Interventi Pagina 11