Axminster T-2000CK Istruzioni per gli Interventi Scaricare il pdf (Pagina 13)

Assembly

12. Locate the bin handle (20), button Phillips screws (f)

and domed head nuts (b). Line up the threaded holes in

the handle (20) with the two pre-drilled holes in the bin

(9) and secure in place with the 1/4" Phillips screw (f ) and

nuts (b), see ﬁ g 31-32.

Fig 31-32

13. Turn the cyclone assembly upright on its wheels,

WARNING! THE MACHINE IS HEAVY

YOU ARE ADVISED TO SEEK HELP!

locate the ﬂ exible hose (8) and the two large clips (24).

Place a clip over one end of the hose, introduce the hose

over the bins inlet manifold and tighten the clip, DON’T

OVERTIGHTEN otherwise the hose could split, see ﬁ g

33. Place the remaining clip over the opposite end of

the hose, insert the hose over the outlet manifold on the

extraction drum (7) and tighten the clip, see ﬁ g 34.

Fig 33-34

14. Locate the large dust bag (19), open the bag and

place it inside the bin (9), see ﬁ g 35. (Make sure the bag

is tucked over the edge of the bin)

Fig 35

15. Position the bin (9) beneath the bin cover (10), line up

the bin lever latches (25) with the hooks on the bin cover

(10), hook on the latches and press down the lever

handles to raise the bin against the cover, making a tight

seal, see ﬁ g 36-37.

Fig 36-37

Continues Over....

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Nessun commento

Axminster T-2000CK Istruzioni per gli Interventi Pagina 13