Axminster T-2000CK Istruzioni per gli Interventi Scaricare il pdf (Pagina 15)

Assembly

20. Find the shaker paddle operating handle (15) and

M6 x12mm bolt (c). Insert the handle’s drive socket onto

the shaker paddle’s drive shaft and screw on the M6 bolt

aperture. Tighten using the supplied spanner (26), see ﬁ g

47-48.

Fig 47-48

Fig 46

Threaded hole

21. Locate the remaining dust bag (19) and securing belt

(23). Open up the bag and rap it around the base of the

air ﬁ lter assembly, see ﬁ g 49. Straighten the retaining belt

(23), wrap it around the ﬁ lter (14) and dust bag (19) and

latch it down to hold and to seal the ﬁ lter assembly, see

ﬁ g 49-50.

22. Remove the bag packaging from the NVR switch

assembly. Locate the two remaining 5/16" Hex bolts (h),

line up the two pre-drilled holes in the NVR switches

mounting bracket with the threaded holes to the

Fig 49-50

underside of the motor assembly housing (1) and secure

using the Hex bolts (h), see ﬁ g 51-52.

Fig 51-52

Continues Over....

NVR switch

Mounting bracket

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Nessun commento

Axminster T-2000CK Istruzioni per gli Interventi Pagina 15