Axminster T-2000CK Istruzioni per gli Interventi Scaricare il pdf (Pagina 12)

Assembly

You will require the bin (9), bin castor wheels (22), bin

lever clamps with Phillips screws and nuts (25), bin

handle (20), 1/4” domed nuts (b), 1/4” button head

Phillips screws (f), dust bag (19), ﬂ exible hose (8) and

large and small clips (24).

9. Turn the bin (9) on its side and screw on the four castor

wheels (22) into the threaded holes to the base of the

bin, tighten the nuts using the supplied 6-7mm spanner

(26), see ﬁ g 23-24-25.

Fig 23-24-25

10. Turn the bin (9) upright, remove the clamping rig

bolt/nut, see ﬁ g 26, place safely aside. Raise the inner

section of the bin, position the clamping ring over the

two rims, replace the bolt/nut and tighten to lock both

units together, see ﬁ g 27-28.

Fig 26

Fig 27-28

11. Locate the bin lever clamps (25) remove the four

nuts and screws to one of the clamps and place safely

aside. Line up the holes in the bin lever clamp assembly

(25) with the four holes to the side of the bin (9), (NOTE:

make sure the lever clamp assembly is the correct

way round, with the clamping lever facing down.

Replace the screws and nuts you removed earlier to

secure the lever clamp in position, see ﬁ g 29-30. Repeat

the process for the remaining clamps.

Fig 29-30

Clamping ring

Inner bin section

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Nessun commento

Axminster T-2000CK Istruzioni per gli Interventi Pagina 12