Axminster T-2000CK Istruzioni per gli Interventi Scaricare il pdf (Pagina 14)

Assembly

16. Locate the air ﬁ lter cartridge (14) and six

5/16" Hex bolts (h), with assistance position

the ﬁ lter cartridge under the motor assembly

housing (1) and line up the threaded holes in

the ﬁ lter with the holes in the motor housing, see ﬁ g 38.

17. Insert the threaded Hex bolts (h) through the holes

and ﬁ nger tighten, make sure the seal on top of the ﬁ lter

is ﬂ ush against the underside of the housing. Using a

spanner or ratchet tighten the six Hex bolt, see ﬁ g 39-40-

41.

Fig 38-39-40

Pre-drilled holes

Ratchet

18. Put to hand the operating handle extension bar (16),

loosen the two cap head screws on the drive socket and

slot the Hex drive over the shaker paddle drive shaft,

see ﬁ g 42. Tighten the cap head screws to secure the

extension bar (16), see ﬁ g 43.

Fig 42-43

Cap head screw

Drive shaft

Hex key

19. Locate the ﬁ lter lid (11) and twelve no: 10 ANC

cap head screws (d). Slot the opening in the ﬁ lter lid over

the shaker paddle drive shaft and down on top of the

motor assembly (1), line up the arrow marker labels on

each unit and secure in place with the cap head screws

(d), see ﬁ g 44-45-46.

Fig 44-45

Arrow marker label

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Nessun commento

Axminster T-2000CK Istruzioni per gli Interventi Pagina 14